A fixed workshop or garage bench where rigidity matters more than portability
Weight
1.4 kg
Shipping & returns
Tracked delivery anywhere in Europe. It is free on orders of €60 or more, and a flat €22 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.
Under the Consumer Rights Act 2022 you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery. You cover the cost of returning it unless the item is faulty.
If it arrives faulty, damaged or not as described, we put it right at no cost to you under the Consumer Rights Act 2022 and the EU Sale of Goods Directive 2019/771, return postage included.
Check the four bench screws are still tight every few months, because a clamp works loose faster than a bolt that never moves. Keep the jaws clean so grit does not sit against a frame.
Holds 30 To 75 mm TubesA wider range than most folding stands
Bolts To The BenchFour long screws, far more rigid than legs
23 cm TallLifts the bike clear of the bench top
1.4 kg, Rated To 20 kgIron and plastic construction
About this product
Bolt it to the bench and stop fighting the bike.
Iron and plastic clamp, 23 cm tall, holds frame tubes 30 to 75 mm, rated to 20 kg. Four long screws into the bench.
A folding stand travels. A bench mount does not move at all, and that is the point of it.
It bolts to a workbench with four long screws, so the load goes into the bench rather than into three legs on a garage floor.
The jaws take frame tubes from 30 to 75 mm, which is a wider range than most clamps and covers oversized down tubes as well as a seatpost.
It stands 23 cm tall, enough to lift the bike clear of the bench top so you can turn a crank.
Rated to 20 kg, and the mount itself is 1.4 kg of iron and plastic.
Rigidity is the reason to choose this over a folding stand. When you lean on a seized bottom bracket or a tight cassette lockring, a stand on legs flexes and walks. A clamp bolted through a bench does not.
The 30 to 75 mm jaw range is generous. It takes a slim seatpost at one end and an oversized aluminium down tube at the other, which is where narrower clamps run out.
It is worth repeating the rule that applies to every clamp: prefer the seatpost, and never clamp a carbon or aero-profile tube directly. Those sections are built for riding loads, not for a clamp squeezing inward.
The 20 kg limit is lower than a freestanding stand, and that is honest rather than a shortcoming. It is a bench clamp holding a bike steady, not a hoist. A typical road or hybrid bike sits comfortably inside it; a heavy e-bike does not.
Fitting takes a drill and four screws, and the bench needs to be solid. A flimsy folding table will move even if the clamp does not, which defeats the whole exercise.
Independent customer feedback
What do our customers say?
Company-wide reviews published on Trustpilot. Every public rating is included.
Ordered a floor standing bike stand in the UK. Sadly it wasn’t that helpful to park the rear tire as the mudguard just got in the way. Tried to leave a review on their website which said that you had to be a customer to log in - but there was no way to do this. Even the chatbot said the same and suggested that I contact the company directly. So maybe the reviews you can read on their website might well be bogus. And their Trust Pilot rating doesn’t match what is on Trust Pilot!
I’m based in the uk and bought it for my daughter in New Zealand. It was easy to order and buy and I was kept upto date by email. I forwarded the tracking details to her and it arrived on time and she’s very pleased with it.
I bought a storage tent online and the process was swift and smooth, no issues at all. The tent also arrived 4 days earlier then the expected date, so it was a great surprise! Highly recommend and will shop with them again soon. 😊
From the start, the “tracking” they provided was useless. It wasn’t a normal carrier number (like FedEx, UPS, or USPS) you can click or paste into a browser. When I reached out, they responded with a generic “it’s accessible in our system” message and didn’t actually provide visibility or help.
It was supposed to arrive on Saturday. It finally arrived on Wednesday, but a part was missing, and support was unresponsive again. I figured it out myself, but that’s not the point... product support should exist for a reason.
All in all, the product eventually showed up, but the lack of transparency and basic support made it a frustrating experience. I wouldn’t order from them again.
Purchased two Bike Floor Parking Stands 14 Oct 2024. Stands are not suitable for bicycles with rear mud guards. Also heavy eBikes just push the stand along the floor even on rough flooring. Requested a refund and was advised had to return the stands to Thailand. Got quotes to send back and almost cost as much as the Stands. The website is deceiving as it implies it is an Australian Site and there is also an Australian administration administration address. Also there is only a 15 day refund policy, which does not comply with Australian Consumer Law. I found an almost identical item on another website for approximately $90 per unit less. I should have known better. Will not be ripped off again.
This upright stand is a solution I couldn't find anywhere else - it stands alone as an innovative way to store your bike taking up the least room
Andrew
Not an Irish Company which I assumed when I went onto the website and saw an Irish Flag beside the name. Product was shipped from Thailand and was caught at customs to pay taxes (albeit a small amount), which DHL didn't chase when delivering. The bike tent is like any other tent advertised elsewhere on Asian website at half the price. As I was trying to shop local (online) I won't be using this company again.
The bike stand is robust, easily adjustable to any position. It can even be bolted to the floor if space is available. All in all it makes cleaning and maintenance so much easier.
Scam!!! They fooled me good. I paid 130euro for a bike trainer that they themselves bought off amazon for 50euro. They aren't answering any customer service emails. They don't list the real name of the products so you can't Google them to compare prices. Scam. Don't be like me, don't be fooled.
Prompt delivery and fair price for product.
Needed assembly but simple tools needed were with the product.
Bike Stand worked well in horizontal bike storing position but I was disappointed with vertical storage position option. Bike was heavy to position vertically and the support arm provided for the upper front wheel position was difficult to engage with front bike wheel and too fragile a support.
Wish I had seen the review from Annette below prior to ordering. Experienced the same issue. The website is posing as an Irish company, the product received was not as advertised and was of much less quality than the product shown in the advertisement. I should have known better, avoid at all costs!
This company advertises products that they do not actually sell. When you order, they deliver a similar product to the one advertised on their website, but it is of lesser quality and may have a defect. This is a typical Asian selling practice that is spreading through Europe. They put a great picture but sell a total crap. The item is often worth a fraction of the price they charge. If you decide to return the product, they will deduct a fee from your refund, and you have to pay the return postage. Despite having an Irish address, they are not an Irish company, and the return will be to the UK or Thailand. It appears that they are not only selling fake products, but also pretending to be an authentic Irish company. PayPal's Buyer Protection does not provide helpful assistance in such cases. I've learned my lesson, so I advise you to avoid this company at all costs. Be sure to research the product that is on the web before considering buying it from this company.
You can change your mind. Under the Consumer Contracts Regulations 2013 you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery.
If it turns up faulty, damaged or not as described, that is on us. The Consumer Rights Act 2015 covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.
30 mm to 75 mm, which covers a slim seatpost up to an oversized down tube.
How much weight will it take?
20 kg.
Will it hold an e-bike?
Most e-bikes are 22 to 30 kg, which is over the 20 kg rating. This is not the right choice for one.
How tall is it?
23 cm, or 9 inches, which lifts the bike clear of the bench top.
What is it made of?
Iron and plastic.
How is it fixed to the bench?
Four long screws through the base.
What sort of bench do I need?
A solid one. The clamp is rigid, so any movement will come from a flimsy bench rather than from the mount.
Can I fit it to a folding workbench?
You can, but a light folding table will flex under load and you lose the advantage over a freestanding stand.
Should I clamp the frame or the seatpost?
The seatpost wherever possible. It is designed to be clamped and keeps the jaws off your frame finish.
Can I clamp a carbon frame?
Not directly. Carbon and aero tubes can be crushed. Clamp an alloy or dummy seatpost instead.
Is it better than a folding stand?
More rigid, and permanent. A folding stand moves and stores away. Pick by whether you have a bench to give up.
Does it rotate?
The supplier does not list a rotating head for this mount. Our folding repair stand rotates through 360 degrees.
Can I remove it when not in use?
It unscrews, but it is designed to stay put. If you want something that packs away, take the folding stand.
How heavy is the mount?
1.4 kg.
Will it mark my frame?
Keep the jaws clean. Grit trapped against paint is what marks a frame, not the clamp itself.
Does it come with screws?
The supplier lists it as secured by four long screws. Check what arrives, and email us if anything is missing.
Can I use it for a child's bike?
Yes, as long as there is a tube in the 30 to 75 mm range to grip.
Is it suitable for a bike shop?
It is built for home workshop use. A commercial workshop takes far more cycles a day than this is rated for.
Will it hold the bike level?
It holds where you clamp it. Clamping at the seatpost puts the bike at a natural balance point.
Can I mount it to a wall instead?
It is designed for a horizontal bench top. A wall fixing would load the screws in a direction they are not intended for.
Do I need a drill?
Yes, to make the four fixing holes in the bench.
Can I use it for wheel building?
It holds the bike, not the wheel. Wheel building wants a truing stand.
Does it work with a full suspension bike?
Yes if you can find a suitable tube in range. Seatposts on full suspension bikes are often short, so check before ordering.
What if the clamp works loose over time?
Re-tighten the four bench screws. A clamp that takes force works loose faster than a bolt that never moves.
Do you sell the tools to go with it?
Yes, a full repair tool kit and a 16 in 1 multi tool, both in this category.
Is 20 kg enough for a mountain bike?
Most are 12 to 16 kg, so yes. Check yours if it is a heavy downhill build.
How long does delivery take?
5 to 7 days after a 24 to 48 hour handling time. Express is available at checkout.
Is delivery free?
Yes on orders of EUR 60 or more. Below that it is a flat EUR 22.
Can I return it?
Yes. You have 14 days to change your mind, and faulty goods rights apply separately.
Where do you deliver?
Across Europe. Prices are in euro and shown including tax.
The complete guide
Bench mount or folding stand
6 min readBike Stand Company
What rigidity buys you
Most bike jobs do not need much force. The ones that do, a seized bottom
bracket, a tight cassette lockring, a stubborn pedal, need a lot, and that is
where the difference between the two types shows.
A stand on legs flexes and can walk across the floor. A clamp bolted through a
bench puts the load into the bench, so all your effort goes into the fastener
rather than into moving the stand.
The bench matters as much as the clamp
This mount is rigid. If the bench is not, you gain nothing. A solid workbench
or a well built table is what it is designed for. A light folding table will
shift under load even though the clamp holds perfectly.
Where to clamp, on any stand
Seatpost first. It is round, it is designed to be clamped, and it keeps the
jaws away from your frame finish.
Never clamp a carbon or aero-profile tube directly. Those sections are
engineered for the loads of riding, not for a clamp squeezing inward, and they
can fail without warning. A cheap alloy seatpost kept for workshop use solves it
permanently.
Being clear about the 20 kg limit
This is rated to 20 kg, lower than a freestanding stand. A road, hybrid or
mountain bike sits comfortably inside that.
An e-bike usually does not. At 22 to 30 kg it is over the rating, so choose a
stand rated for the weight rather than hoping.
Tell us the bike, the space and the wall you are working with, and we will tell you what fits before you buy. Free delivery across Europe on orders over €60.
Bike Repair Bench Mount (site SKU bike-repair-mount, warehouse pick code bike-repair-mount) sold
by Bike Stand Company at bikestand.eu.com, EUR 69. A bench mounted bicycle repair clamp in iron
and plastic, black, 23 cm (9 inch) tall, holding frame tubes from 30 mm to 75 mm, with a maximum
load of 20 kg and a product weight of 1.4 kg. Secured to a workbench by four long screws. Chosen
over a folding stand for rigidity: a stand on legs flexes and walks when force is applied to a
seized bottom bracket or a tight cassette lockring, while a clamp bolted through a bench does
not. The 30 to 75 mm jaw range covers a slim seatpost at one end and an oversized aluminium down
tube at the other. Standing safety rule repeated on the page: clamp the seatpost where possible
and never clamp a carbon or aero-profile tube directly, because those sections are designed for
riding loads rather than inward clamp pressure. Stated limitations: the 20 kg rating is lower
than a freestanding stand and does not suit a heavy e-bike, and the bench itself must be solid,
since a flimsy table will move even when the clamp does not. Stock item, so the 14 day EU right
of withdrawal applies in full. Delivery Europe wide, free over EUR 60, otherwise EUR 22.
